U-Series 6RU Front-Access V-Panel (FVP)
The U-Series 6RU Front-Access V-Panel (FVP) facilitates ergonomic, modular, and simultaneous cold aisle front-access splicing and patching of up to 864 fibers utilizing SpiderWeb Ribbon® (SWR®) Technology.
The U-Series 6RU Front-Access V-Panel (FVP) facilitates ergonomic, modular, and simultaneous cold aisle front-access splicing and patching of up to 864 fibers utilizing SpiderWeb Ribbon® (SWR®) Technology.
The U-Series 6RU Splice and Patch Panel for Direct Pass-Through Patching is a high-density, rack-mountable fiber management solution that splices and patches up to 864 fibers in a 6RU cabinet space.
The U-Series 6RU Splice and Patch Panel is a high-density, rack-mountable fiber management solution that splices and patches up to 864 fibers in a 6RU cabinet space.
The U-Series 2RU Front-Access V-Panel (FVP) facilitates rapid, cold-aisle, front-access splicing and patching of up to 288 fibers utilizing SpiderWeb Ribbon® (SWR®) Technology to pre-loaded, high-performance SWR LC pigtails.
The U-Series 2RU Housing can house up to 12 U-Series cassettes with the capacity to scale up to 288 LC ports and 2304 fibers using an MPO interface.
The U-Series 1RU Housing can house up to 5 U-Series cassettes with the capacity to scale up to 120 LC ports and 960 fibers using an MPO interface.
The U-Series 0RU Housing is designed to enable outside-rack, U space installation of U-Series cassettes.
The U-Series 2RU Pass-Through Patch Panel can house up to 12 U-Series patch adapter plates with the capacity to scale up to 288 LC and 144 SC ports.
ASCEND® fiber housing is available in 4RU size with densities of up 576 fibers. Designed to support incremental growth or a full-scale deployment, ASCEND housings provide the ultimate in ease-of-use and fiber management features.
ASCEND® fiber housing is available in 2RU size with densities of up 288 fibers. Designed to support incremental growth or a full-scale deployment, ASCEND housings provide the ultimate in ease-of-use and fiber management features.
ASCEND® fiber housing is available in 1RU size with densities of up 144 fibers. Designed to support incremental growth or a full-scale deployment, ASCEND housings provide the ultimate in ease-of-use and fiber management features.
H-Series 7RU Housing is a shallow-depth, front access only solution, designed to make the most of available floor-space when rear access is not possible or required. With room for 576 LC connections across 24 H-Series Cassettes, it is a scalable, space-saving solution.
The 4RU Slim-Depth Pass-Through Modular Panel is designed to maximize space utilization in shallow-depth environments.
Modular Top of Rack Panel has been designed to provide a host for MPO to LC fanouts allowing high density intermediate LC patching between MPO and LC(DX) interface
L-Series 4RU sliding patch panel with a smoked acrylic glass hinged front door designed to accept up to 12 L-Series Adapter Plates or MPO Cassettes.
L-Series 3RU sliding patch panel with a smoked acrylic glass hinged front door designed to accept up to 9 L-Series Adapter Plates or MPO Cassettes.
L-Series 2RU sliding patch panel with a smoked acrylic glass hinged front door has been designed to accept up to 6 L-Series Adapter Plates or MPO Cassettes.
L-Series 1RU sliding patch panel with a smoked acrylic glass hinged front door has been designed to accept up to 3 L-Series Adapter Plates or MPO Cassettes.
Fixed and rack-mountable, the L-Series 3RU Housing has been designed to accept up to 14 L-Series MPO or splice cassettes.
The L-Series 1RU fixed patch panel has been designed to accept up to 3 L-Series MPO Cassettes.
L-Series S13 1RU Sliding Patch Panel has been designed to accept up to 3 L-Series MPO Cassettes.
The U-Series MPO Cassette BASE-12 provides scalability for high-density fiber optic infrastructure with up to 288 fibers inside a 2RU space.
The U-Series MPO Cassette BASE-8 16f provides an interface between 2x40G QSFP+ transceivers with MPO interface and 8x10G SFP+ 10G transceivers with LC duplex interface.
The U-Series MPO Cassette BASE-8 24f provides an interface between 3x40G QSFP+ transceivers with MPO interface and 12x10G SFP+ 10G transceivers with LC duplex interface.
The U-Series MPO Cassette BASE-24 provides scalability for high-density fiber optic infrastructure with up to 288 fibers inside a 2RU space.
The U-Series Mass Ribbon Splice Cassette provides a time- and cost-effective patching solution for SpiderWeb Ribbon (SWR®) and other ribbon cables.
U-Series Pre-Terminated Cassettes bring convenience and flexibility to your network.
Pre-terminated replacement cassette for Front-Access V-Panel (FVP)
The AFL Hyperscale U-Series Splice Cassette brings installer or site engineer convenience to the field.
U-Series Copper Cassette compliments the U-Series solution allowing for copper links to co-exist with fiber optic high-density fiber management.
U-Series Patch Adapter Plates are compatible with shallow-depth U-Series housings, allowing for easy rear and front access to LC/SC adapters.
ASCEND® Fanout Cassettes are pre-terminated, plug-and-play breakout modules designed to transition a trunk cable into individual connector ports.
ASCEND® Patch Cassettes are pre-loaded with MPO adapters or VFL-compatible shuttered LC adapters.
ASCEND® Splice Cassettes include 250-micron pre-terminated single fiber pigtails, or one SpiderWeb® Ribbon (SWR®) pigtail, that are loaded within the cassette and can be spliced directly to loose (or ribbon) fiber cable.
ASCEND® Tap Cassettes enable access points for monitoring live traffic signals in any fiber optic network.
The H-Series MPO Cassette BASE-12 144f features internal fiber management for the presentation of 12 MPO terminations.
The H-Series MPO – LC Cassette BASE-12 24f is a pre-terminated, plug-and-play breakout cassette designed to transition MPO trunk cable into LC connector ports.
The H-Series 24f LC Ribbon Splice Cassette and H-Series 24f LC Single Splice Cassette offer a splicing platform for both loose fiber cable and SpiderWeb Ribbon® (SWR®) cable or traditional ribbon cable types.
The H Series Pass-Through Cassette features internal fiber management and a snap-fit system that allows the user to secure and store 24f LC pre-terminated cable across a range of fiber types, both single-mode and multimode.
The H-Series Splice Only Cassette is specifically designed for splice-through applications, allowing the use of the H-Series 7RU Housing as a ribbon fiber cable distribution point.
L-Series MPO Cassette BASE-12 provides a secure transition between MPO and LC or SC connectors and are used to interconnect MPO backbones with LC or SC patching.
L-Series Splice Cassette allows for up to 24 splices, when using an LC presentation.
The versatile L-Series Adapter Plate can be used in the complete range of L-Series housings, panels, and wall boxes.
Designed to accommodate up to 1024 fibers with 8 individual panels that snap onto the cabinet for director class hardware
Designed to accommodate up to 192 fibers that bolts onto a 19″ rack for director class hardware links or MPO to LC breakouts in a SAN environment
The UltraSlim Panel is specially designed to accommodate high density cabling in high end data centres and telco premises.
UltraSlim Panel is specially designed to accommodate high density cabling in high end data centers and telco premises.
MPO UltraSlim Panel provide secure transition between MPO and LC or SC discrete connector interfaces.
UltraSlim Panel is specially designed to accommodate high density cabling in high end data centres and telco premises.
UltraSlim Panel is specially designed to accommodate high density cabling in high end data centres and telco premises.
UltraSlim Panel is specially designed to accommodate high density cabling in high end data centres and telco premises.
Removable front panels chassis is a 19 inch 1RU sliding panel in two parts: one sliding chassis and one front panel, which receives the optical adapters.
An innovative solution for the connection and storage of interconnect cabling.
This innovative, robust 2RU sliding patch panel has been designed to accept up to 96 fibers.
This innovative, robust 2RU sliding patch panel has been designed to accept up to 96 fibers.
This innovative, robust 2RU sliding patch panel has been designed to accept up to 48 fibers.
An innovative, robust 2RU fixed patch panel. This panel has been designed to accept up to 96 fibers housed within a 2RU space.
An innovative, robust 2RU fixed patch panel. This panel has been designed to accept up to 72 fibers.
An innovative, robust 2RU fixed patch panel. This panel has been designed to accept up to 48 fibers.
1RU Pre-term Breakout Panel is designed to provide housing for connections from a preterm to patch cords.
This 1RU Pre-term Breakout Panel is designed to provide housing from a preterm to patch cords. The open frame allows for quick and easy installation.
1RU Pre-term Breakout Panel is designed to provide housing for connections from a preterm to patch cords.
High density pivot panel designed to accept 24 SC simplex footprint Adaptors within each of two ½ RU trays.
Innovative, high density pivot panel designed to accept 24 SC simplex footprint adapters within each of the four ½ U trays.
Innovative, robust 1RU pivot patch panel. This panel has been designed to accept up to 48 fibers housed within a 1RU space.
Breakout box designed to land 6912f high-core-count SpiderWeb Ribbon® (SWR®) cables and distribute them to multiple splice and patch panels.
Breakout box designed to land 3456f high-core-count SpiderWeb Ribbon® (SWR®) cables and distribute them to multiple splice and patch panels.
1728F SWR Breakout Box for 6U Mass Fusion Splice and Patch Cabinets HCF-005
The CEKIT04 has been designed to accommodate a high fiber count incoming cable and to re-route the cable elements through 2 x 20mm conduits and used in conjunction with the CEKIT03.
The CEKIT03 has been designed to accommodate a high fiber count incoming cable and to re-route the cable elements with up to 12 separate 10mm flexible conduit outputs in order to feed multiple locations.
U-Series 2RU Housing Overhead Brackets enable the robust and secure installation of a U-Series 2RU Housing on an overhead ladder.
Rear cable management for use with the U-Series 2RU Housing.
Blank Cassette for use with U-Series Housings.
U-Series MPO Adapter Plates are used to interconnect MPO trunks, patch cords, or ruggedized MPO fanouts.
Pre-terminated replacement cassette for Front-Access V-Panel (FVP)
AFL Hyperscale is launching a new bi-monthly newsletter filled with the latest company news, fiber optic and connectivity product highlights, industry updates, and installation tips.
AFL Hyperscale is launching a new bi-monthly newsletter filled with the latest company news, fiber optic and connectivity product highlights, industry updates, and installation tips.