AFL Hyperscale
  • Products
    • Fiber
      • Assemblies
        • Multi-Fiber Assemblies
        • MPO Assemblies
        • Cassette Assemblies
        • Patch Cords
        • Pigtails
      • Cable
        • SpiderWeb Ribbon® Cables
        • Inside Plant (ISP)
        • Inside Plant (ISP) / Outside Plant (OSP)
        • Outside Plant (OSP)
        • CPR Cables
      • Adapters and Connectors
        • Adapters
        • Attenuators
        • Connectors
        • Field Installable Connectors
    • Panels, Frames & Enclosures
          • Panels and Housings
            • Housings
            • Cassettes for Housings
            • Housing Accessories
            • Sliding Panels
            • Fixed Panels
            • Pivot Panels
          • Cabinets
          • Frames
          • Optical Distribution Frames (ODF)
          • Outside Enclosures
          • Wall Boxes
    • Cable Management
          • Cable Management Bars
          • Brush Strips
          • Blanks
          • Cable Management Accessories
    • Test and Inspection
    • Accessories and Cleaning
          • Accessories
            • Splice Cassettes
            • Splice Protectors
            • Fiber Management Accessories
            • Hand Tools
          • Cleaning and Consumables
    • Copper
          • Copper Cable
          • Copper Patch Cords
          • Copper Panels
          • Copper Keystone Jacks
          • Copper Accessories
            • Copper Faceplates
            • Copper Hand Tools
          • Sort by category
            • Cat 7A
            • Cat 6A
            • Cat 6
            • Cat 5e
            • Cat 3
  • Solutions
    • Data Center Solutions
          • Hyperscale
            • Hyperscale challenges
            • Our capabilities
            • Hyperscale infrastructure solutions
          • Colocation
            • Colocation challenges
            • Our capabilities
            • Colocation infrastructure solutions
    • Network Solutions
          • Ultra-High Fiber Count
          • Network Speed
            • 400G
            • 40/100G
          • Modular Connectivity
            • U-Series
            • H-Series
            • L-Series
            • ASCEND®
          • SpiderWeb Ribbon®
          • Building Entrance Facility
          • Mass-Fusion Splice
          • Pre-Terminated
          • Network Installation
          • Copper
            • CAT 5e Solutions
            • CAT 6 Solutions
            • CAT 6A Solutions
    • Enterprise
  • Resources
    • Corporate Information
    • Articles
    • Product Resources
    • White Papers
    • Videos
    • Declaration of Performance
    • Glossary
  • About Us
    • Our Values
    • News
      • Product News
      • EMEA News
      • Company News
      • Community News
    • Events
    • Working With Us
    • Working For Us
    • History and Milestones
    • Our Family
  • Partners
  • Contact
AFL Hyperscale
  • Products
    • Fiber
      • Assemblies
        • Multi-Fiber Assemblies
        • MPO Assemblies
        • Cassette Assemblies
        • Patch Cords
        • Pigtails
      • Cable
        • SpiderWeb Ribbon® Cables
        • Inside Plant (ISP)
        • Inside Plant (ISP) / Outside Plant (OSP)
        • Outside Plant (OSP)
        • CPR Cables
      • Adapters and Connectors
        • Adapters
        • Attenuators
        • Connectors
        • Field Installable Connectors
    • Panels, Frames & Enclosures
          • Panels and Housings
            • Housings
            • Cassettes for Housings
            • Housing Accessories
            • Sliding Panels
            • Fixed Panels
            • Pivot Panels
          • Cabinets
          • Frames
          • Optical Distribution Frames (ODF)
          • Outside Enclosures
          • Wall Boxes
    • Cable Management
          • Cable Management Bars
          • Brush Strips
          • Blanks
          • Cable Management Accessories
    • Test and Inspection
    • Accessories and Cleaning
          • Accessories
            • Splice Cassettes
            • Splice Protectors
            • Fiber Management Accessories
            • Hand Tools
          • Cleaning and Consumables
    • Copper
          • Copper Cable
          • Copper Patch Cords
          • Copper Panels
          • Copper Keystone Jacks
          • Copper Accessories
            • Copper Faceplates
            • Copper Hand Tools
          • Sort by category
            • Cat 7A
            • Cat 6A
            • Cat 6
            • Cat 5e
            • Cat 3
  • Solutions
    • Data Center Solutions
          • Hyperscale
            • Hyperscale challenges
            • Our capabilities
            • Hyperscale infrastructure solutions
          • Colocation
            • Colocation challenges
            • Our capabilities
            • Colocation infrastructure solutions
    • Network Solutions
          • Ultra-High Fiber Count
          • Network Speed
            • 400G
            • 40/100G
          • Modular Connectivity
            • U-Series
            • H-Series
            • L-Series
            • ASCEND®
          • SpiderWeb Ribbon®
          • Building Entrance Facility
          • Mass-Fusion Splice
          • Pre-Terminated
          • Network Installation
          • Copper
            • CAT 5e Solutions
            • CAT 6 Solutions
            • CAT 6A Solutions
    • Enterprise
  • Resources
    • Corporate Information
    • Articles
    • Product Resources
    • White Papers
    • Videos
    • Declaration of Performance
    • Glossary
  • About Us
    • Our Values
    • News
      • Product News
      • EMEA News
      • Company News
      • Community News
    • Events
    • Working With Us
    • Working For Us
    • History and Milestones
    • Our Family
  • Partners
  • Contact
  • Products
    • Fiber
      • Assemblies
        • Multi-Fiber Assemblies
        • MPO Assemblies
        • Cassette Assemblies
        • Patch Cords
        • Pigtails
      • Cable
        • SpiderWeb Ribbon® Cables
        • Inside Plant (ISP)
        • Inside Plant (ISP) / Outside Plant (OSP)
        • Outside Plant (OSP)
        • CPR Cables
      • Adapters and Connectors
        • Adapters
        • Attenuators
        • Connectors
        • Field Installable Connectors
    • Panels, Frames & Enclosures
          • Panels and Housings
            • Housings
            • Cassettes for Housings
            • Housing Accessories
            • Sliding Panels
            • Fixed Panels
            • Pivot Panels
          • Cabinets
          • Frames
          • Optical Distribution Frames (ODF)
          • Outside Enclosures
          • Wall Boxes
    • Cable Management
          • Cable Management Bars
          • Brush Strips
          • Blanks
          • Cable Management Accessories
    • Test and Inspection
    • Accessories and Cleaning
          • Accessories
            • Splice Cassettes
            • Splice Protectors
            • Fiber Management Accessories
            • Hand Tools
          • Cleaning and Consumables
    • Copper
          • Copper Cable
          • Copper Patch Cords
          • Copper Panels
          • Copper Keystone Jacks
          • Copper Accessories
            • Copper Faceplates
            • Copper Hand Tools
          • Sort by category
            • Cat 7A
            • Cat 6A
            • Cat 6
            • Cat 5e
            • Cat 3
  • Solutions
    • Data Center Solutions
          • Hyperscale
            • Hyperscale challenges
            • Our capabilities
            • Hyperscale infrastructure solutions
          • Colocation
            • Colocation challenges
            • Our capabilities
            • Colocation infrastructure solutions
    • Network Solutions
          • Ultra-High Fiber Count
          • Network Speed
            • 400G
            • 40/100G
          • Modular Connectivity
            • U-Series
            • H-Series
            • L-Series
            • ASCEND®
          • SpiderWeb Ribbon®
          • Building Entrance Facility
          • Mass-Fusion Splice
          • Pre-Terminated
          • Network Installation
          • Copper
            • CAT 5e Solutions
            • CAT 6 Solutions
            • CAT 6A Solutions
    • Enterprise
  • Resources
    • Corporate Information
    • Articles
    • Product Resources
    • White Papers
    • Videos
    • Declaration of Performance
    • Glossary
  • About Us
    • Our Values
    • News
      • Product News
      • EMEA News
      • Company News
      • Community News
    • Events
    • Working With Us
    • Working For Us
    • History and Milestones
    • Our Family
  • Partners
  • Contact

Home » Fiber » Assemblies

Assemblies

AFL Hyperscale design and manufacture a complete range of configurable fiber assemblies that have been factory-terminated, machine-polished, and tested, to ensure the highest quality and performance for your network. 

  • All Assemblies
  • Multi-Fiber Assemblies
  • MPO Assemblies
  • Cassette Assemblies
  • Patch Cords
  • Pigtails
Menu
  • All Assemblies
  • Multi-Fiber Assemblies
  • MPO Assemblies
  • Cassette Assemblies
  • Patch Cords
  • Pigtails

MicroCable Assemblies (2mm Tails)

A smaller, more flexible and compact product providing at the same time an improved optical performance of microcable cable structure.

MicroCable Assemblies (900um Tails)

MicroCable assembly features a small, compact size providing flexible though ruggedized product with the improved optical performance.

Multi-Fiber Loose Tube (LT) Cable Assembly

Loose tube multi-fiber cable assemblies utilize our patented transition modules which guarantee superior tensile strength and crush resistance.

Multifiber Distribution (Tight Buffered) Cable Assemblies

Tight Buffer Distribution factory made, quality controlled fiber optic assembly is specified for short internal optical links.

Preterm and MPO B2CA CPR Multifibre Cable Assembly

AFL Hyperscale multifibre assembly built with high fire performance CPR B2CA cable

ASCEND® Trunk Cable Assemblies

ASCEND® trunk cable assemblies provide a high-performance plug-and-play solution for premise installations where space is a premium.

MPO MicroCable Trunk Assembly

MPO trunk multicore cable assemblies facilitate rapid deployment of high density backbone cabling in data centers and other high fiber environments

MPO MicroCable Patch Assembly (Single Jacket 3mm OD)

MPO Patch multicore cable assemblies facilitate rapid deployment of high density cabling in data centers and other high fiber environments.

Cca MPO MicroCable Patch Assembly (Single Jacket 3mm OD)

MPO Patch Assembly built with high fire performance CPR Cca cable

MPO Trunk BASE-8

MPO QSFP+ trunk/patch cord assemblies interconnect QSFP+ transceivers operating within 40GBASE-SR parallel optics networks. QSFP+ transceivers utilize a 12-fiber MPO interface and perform 40G transmission using 4 x 10G channels (8 fibers: 4 x TX and 4 x RX).

CXP/CFP 100G MPO Cable Assembly

CXP/CFP 100G MPO/MTP® cable assemblies are designed to make a connection between 2 CFP/CXP transceivers.

MPO 24 Fiber Ferrule Cable Assembly

MPO interface facilitate rapid deployment of high density backbone cabling in data centers and other environments reducing installation time and cost.

MPO MicroCable Fan-Out Assembly

MPO Ruggedized Fan-Out Assemblies route multifiber MPO connection into discrete connectors. Used to directly interconnect MPO.

MPO to LC Assembly BASE-8

40G parallel optics transceivers (40GBASE-SR4) supports 4x10G modes, making new parallel optics active equipment compatible with existing 10G transceivers.

40G QSFP+ 3:2 (MPO) Transition Assembly

40G parallel optics protocol transmission is performed by sending 4 x separate 10G channels in parallel.

MPO Loose Tube Trunk

AFL Hyperscale LT is a special design platform for Loose Tube multifiber optical cable assemblies.

U-Series MPO Cassette BASE-12

The U-Series MPO Cassette BASE-12 provides scalability for high-density fiber optic infrastructure with up to 288 fibers inside a 2RU space.

U-Series MPO Cassette BASE-24

The U-Series MPO Cassette BASE-24 provides scalability for high-density fiber optic infrastructure with up to 288 fibers inside a 2RU space.

U-Series MPO Cassette BASE-8 24f

The U-Series MPO Cassette BASE-8 24f provides an interface between 3x40G QSFP+ transceivers with MPO interface and 12x10G SFP+ 10G transceivers with LC duplex interface.

U-Series MPO Cassette BASE-8 16f

The U-Series MPO Cassette BASE-8 16f provides an interface between 2x40G QSFP+ transceivers with MPO interface and 8x10G SFP+ 10G transceivers with LC duplex interface.

U-Series Pre-Terminated Cassette

U-Series Pre-Terminated Cassettes bring convenience and flexibility to your network.

U-Series FVP Pre-Terminated Replacement Cassette

Pre-terminated replacement cassette for Front-Access V-Panel (FVP)

H-Series MPO – LC Cassette BASE-12 24f

The H-Series MPO – LC Cassette BASE-12 24f is a pre-terminated, plug-and-play breakout cassette designed to transition MPO trunk cable into LC connector ports.

ASCEND® Fanout Cassettes

ASCEND® Fanout Cassettes are pre-terminated, plug-and-play breakout modules designed to transition a trunk cable into individual connector ports.

L-Series MPO Cassette BASE-12

L-Series MPO Cassette BASE-12 provides a secure transition between MPO and LC or SC connectors and are used to interconnect MPO backbones with LC or SC patching.

UltraSlim 1RU Panel BASE-12 144f

UltraSlim Panel is specially designed to accommodate high density cabling in high end data centers and telco premises.

UltraSlim 1RU V-Panel BASE-12 144f

The UltraSlim Panel is specially designed to accommodate high density cabling in high end data centres and telco premises.

UltraSlim 1RU V-Panel BASE-8 144f

UltraSlim Panel is specially designed to accommodate high density cabling in high end data centres and telco premises.

UltraSlim 1RU V-Panel BASE-8 144f (with Rear Manager)

UltraSlim Panel is specially designed to accommodate high density cabling in high end data centres and telco premises.

Ultraslim 1RU V-Panel BASE-8 96f

UltraSlim Panel is specially designed to accommodate high density cabling in high end data centres and telco premises.

Premium LC Duplex Polarity Reversible Uniboot Patch Cord

Our premium LC duplex polarity reversible uniboot patch cord connector has a unique* and branded design for polarity reversal without the use of tools and without twisting or movement of the optical fiber.

Data Center Premium Patch Cords

Data center premium low loss patch cords are designed for data center applications. The patch cords provide flexible interconnection to active equipment

SM Simplex/Duplex Enhanced Patch Cord

Single mode enhanced patch cords are used for telecom networks and also used for high speed metropolitan and access network.

LC Enhanced Short Boot Patch Cords

LC Enhanced patch cords supplied with a short boot are ideal for high density applications with tight space requirements.

OS1 OS2 G657 SC Enhanced Short Boot Patch Cords

SC enhanced patch cords supplied with a short boot are ideal for applications with tight space requirements.

OM3 OM4 RBS LC Enhanced Short Boot Patch Cords

LC enhanced patch cords supplied with a short boot are ideal for high density applications with tight space requirements.

OM3 OM4 RBS SC Enhanced Short Boot Patch Cord

SC enhanced patch cords supplied with a short boot are ideal for high density applications with tight space requirements.

OM4 Simplex/Duplex Enhanced Patch Cord

Enhanced multimode patch cords are used to connect high speed and legacy networks like gigabit ethernet, fast ethernet and ethernet.

OM3 Simplex/Duplex Enhanced Patch Cord

Enhanced multimode patch cords are used to connect high speed and legacy networks like gigabit ethernet, fast ethernet and ethernet.

OM2 Simplex/Duplex Enhanced Patch Cord

Multimode enhanced patch cords are used to connect high speed and legacy networks like gigabit ethernet, fast ethernet and ethernet.

OM1 Simplex/Duplex Enhanced Patch Cord

Multimode enhanced patch cords are used to connect high speed and legacy networks like gigabit ethernet, fast ethernet and ethernet.

Enhanced Armoured Patch Cords

Enhanced armored patch cords are used in customer premises, central offices and in indoor harsh environments.

Premium Patch Cords

Premium low loss range of patch cords are suitable for telecom, datacom, data center and some critical applications.

Premium Telecom Patch Cords

Premium telecom range of patch cords are designed for low loss telecommunication applications.

Attenuated Patch Cords

High performance attenuated patch cords are used to attenuate the optical signal in a link.

Mode Conditioning Patch Cords

Mode conditioning patch cords are specifically designed for launching a gigabit signal into the OM1(62.5/125) or OM2(50/125) fiber.

Standard Patch Cords

Standard range of patch cords providing an optimized and cost effective solution for most applications including enterprise, lan and datacom.

Blister Packed Enhanced Pigtails

Convenient and cost effective way to purchase enhanced high quality pigtails and with a reduction in the amount of packaging.

Secondary Coated 900 micron Fiber

Secondary coated 900 µm fibers are ideal for use within splice trays or in other protected environments.

Secondary Coated Easy Strip 900 micron Fiber

Secondary coated 900µm fibers are ideal for use within splice trays or in other protected environments.

Secondary Coated Tight Buffered 900 micron Fiber

Secondary coated 900µm fibers are ideal for use within splice trays or in other protected environments.

Premium Pigtails

Premium low loss range of pigtails are suitable for telecom, datacom, data center and some critical applications.

OS1 OS2 Single mode Enhanced Pigtail

Single mode enhanced pigtails are used in telecom, datacom networks and also used for high speed metropolitan and access network.

OM4 Multimode Enhanced Pigtail

Multimode enhanced pigtails are used to connect high speed networks like gigabit ethernet, fast ethernet and ethernet.

OM3 Multimode Enhanced Pigtail

Multimode enhanced pigtails are used to connect high speed networks like gigabit ethernet, fast ethernet and ethernet.

OM2 Multimode Enhanced Pigtail

Multimode enhanced pigtails are used to connect high speed networks like gigabit ethernet, fast ethernet and ethernet.

OM1 Multimode Enhanced Pigtail

Multimode enhanced pigtails are used to connect high speed networks like gigabit ethernet, fast ethernet and ethernet.

Semi-Tight Buffer Enhanced Pigtails

Semi tight buffer enhanced pigtail are suitable for use in fusion splicers, but can be easily stripped to longer lengths

Enhanced Cabled Pigtails

Enhanced cabled pigtails use a ruggedised 2 or 3 mm jacket that allows more robust handling while still being suitable for splicing or field termination.

Standard Pigtails

Standard range of pigtails provide an optimized and cost effective solution for most applications including enterprise, lan, and datacom.

MPO/MTP Loop Back

MTP® trunk multicore cable assemblies facilitate rapid deployment of high density backbone cabling in data centers and other high fiber environments.

Fan Out Kits

Indoor buffer tube fan-out kits are specifically designed for the termination of 6 and 12 fiber loose tube cables.

LC Premium Short Boot Patch Cords

LC Premium patch cords supplied with a short boot are ideal for high density applications with tight space requirements.

Products

Fiber

Panels, Frames & Enclosures

Cable Management

Test and Inspection

Accessories and Cleaning

Copper

Solutions

Data Center Solutions

Network Solutions

Resources

Corporate Information

Articles

Product Resources

White Papers

Videos

Declaration of Performance

Glossary

About Us

Our Values

News

Events

Working With Us

Working For Us

History and Milestones

Our Family

Partners

Feedback

Your comments help us improve our website

Leave Feedback
Contact Us
Linkedin Facebook-f Instagram Twitter Youtube
Linkedin Facebook-f Instagram Twitter Youtube
  • Privacy Policy
  • Terms and Conditions
  • Slavery Statement
  • Cookie Policy
  • Company Registration Number: 02734823
  • Privacy Policy
  • Terms and Conditions
  • Slavery Statement
  • Cookie Policy
  • Company Registration Number: 02734823
Copyright © 2022 AFL Hyperscale. All rights reserved.