
Fiber Raceway Horizontal Tee
Fiber Raceway Horizontal Tee attaches to 4″x15″, 4″x10″, 4″x5″, or 2.36″x2.36″ channel and/or fittings to create a 90° horizontal branch from a straight horizontal run.
Home » Fiber Raceway » Fiber Raceway Transitions
Fiber Raceway Horizontal Tee attaches to 4″x15″, 4″x10″, 4″x5″, or 2.36″x2.36″ channel and/or fittings to create a 90° horizontal branch from a straight horizontal run.
Fiber Raceway Horizontal Elbow attaches to 4″x15″, 4″x10″, 4″x5″, or 2.36″x2.36″ channel and/or fittings to create a 90° horizontal elbow from a straight horizontal run.
Fiber Raceway Horizontal Cross attaches to 4″x15″, 4″x10″, 4″x5″, or 2.36″x2.36″ channel and/or fittings to create a horizontal four-way cross intersection with two 4″x15″, 4″x10″, 4″x5″, or 2.36″x2.36″ exits, respectively.
Fiber Raceway Up Elbow attaches to 4″x15″, 4″x10″, 4″x5″, or 2.36″x2.36″ channel and/or fitting to create a 45° upward angle from a straight horizontal run and can be used with 45° Down Elbow to change the level of a horizontal run.
Fiber Raceway Down Elbow attaches to 4″x15″, 4″x10″, 4″x5″, or 2.36″x2.36″ channel and/or fitting to create a 45° downward angle from a straight horizontal run.
Fiber Raceway Conversion attaches any 4″x15″, fitting or channel to any 4″x10″ fitting or channel, or any 4″x10″ to any 4″x5″ fitting or channel – plus any 4”x 5” to Panduit/ADC 4”x4”/ 4”x 6” fitting or channel.
Fiber Raceway Junction quickly joins two sections of channel and/or fittings without the need for any tools.
Fiber Raceway Downspout assembles onto a 4″x5″, 4″x10″, or 4″x15″ channel, spilling over the side into a 90mm or 130mm movable exit with or without a corrugated pipe.
Fiber Raceway Cut In Tee attaches to 4″x10″ or 4″x5″ channel to create a 90° horizontal elbow from anywhere on a straight horizontal run.
Fiber Raceway End Cap is used for closing off open ends of the channel or fittings.