ROGUE® OTDR Module features an intuitive LinkMap® display for easy results interpretation with pass/fail event status for multimode & singlemode networks. Users can toggle between LinkMap and trace view with landscape and portrait modes available for screen optimization.
Designed with high density structured cabling and data center networks in mind ROGUE OTDR boasts up to 37dB in dynamic range and ultra-short deadzones for high resolution event mapping. Automatic and manual test modes support both novice and expert users troubleshoot complex network issues.
ROGUE OTDR is available in singlemode 1310/1550nm, or quad 850/1300/1310/1550nm models. Each model comes equipped with an integrated visual fault identifier and optional source and power meter. ROGUE modules are hot-swappable by design and insert into either cB1, or iB1 base options to be paired with downloadable test apps for seamless connectivity to aeRos® Cloud-based Test Management for remote configuration, project progress tracking, and instant real-time access to test results.
| OTDR | MULTIMODE |
|---|---|
| OTDR Emitter Type | LED |
| Safety Class | Class 1 FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03 |
| Wavelengths | 850/1300 ±20 nm |
| Fiber Type | Multimode; Compatible with OM1, OM2, OM3, OM4, OM5 |
| Connector Type | User-specified UPC or APC ferrule with interchangeable UCI adapters |
| Dynamic Rangeb | ≥29/29 dB |
| Event Dead Zonec | ≤0.8 m @ 850/1300 nm typical |
| Attenuation Dead Zoned | ≤3.0 m |
| Pulse widths | 3, 5, 10, 30, 100, 200, 500 ns; 1 µs |
| Range Settings | 250 m to 30 km |
| Data Points | Up to 300,000 |
| Data Point Spacing | ≤5 cm to ≤16 m |
| Index of Refraction | 1.3000 to 1.7000 |
| Distance Uncertainty (m) | ±(1 + 0.0025% x distance + data point spacing) |
| Linearity | ±0.03 dB/dB |
| Loss Threshold | ≤0.02 dB |
| Loss Resolution | 0.001 dB |
| Reflectance Range (typical) | 850 nm: -20 to -58 dB / 1300 nm: -20 to -63 dB / Reports saturated/clipped reflections |
| Reflectance Resolution | 0.01 dB |
| Reflectance Accuracy | ±2 dB |
| Trace File Format | SR-4731 Issue 2 |
| Internal Launch Fiber | ≥50 m internal launch fibers (SMF and MMF) |
| OTDR Modes | Supports Auto, Expert, Real-Time |
| Live Fiber Protection | No OTDR damage when connected to live fiber delivering ≤ +3 dBm at wavelength(s) in range 825 to 1675 nm |
| Live Fiber Detection | Reports live fiber when optical signal detected with wavelength in range 825 to 1675 nm, average power level ≥-35 dBm and either CW or modulation frequency ≥270 Hz |
| OTDR | SINGLEMODE |
|---|---|
| OTDR Emitter Type | Laser |
| Safety Class | Class 1 FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03 |
| Wavelengths | 1310/1550 ±20 nm |
| Fiber Type | Single-mode; Compatible with all G.652, G.655, and G.657 SMF |
| Connector Type | User-specified UPC or APC ferrule with interchangeable UCI adapters |
| Dynamic Rangeb | ≥37/36 dB |
| Event Dead Zonec | ≤0.8 m @ 1310/1550 nm typical |
| Attenuation Dead Zoned | ≤3.5 m |
| Pulse widths | 3, 5, 10, 30, 100, 200, 500 ns; 1, 2.5, 5, 10, 20 µs |
| Range Settings | 250 m to 240 km |
| Data Points | Up to 300,000 |
| Data Point Spacing | ≤5 cm to ≤16 m |
| Index of Refraction | 1.3000 to 1.7000 |
| Distance Uncertainty (m) | ±(1 + 0.0025% x distance + data point spacing) |
| Linearity | ±0.03 dB/dB |
| Loss Threshold | ≤0.02 dB |
| Loss Resolution | 0.001 dB |
| Reflectance Range (typical) | 1310 nm: -20 to -65 dB; / 1550 nm: -20 to -65 dB / Reports saturated/clipped reflections |
| Reflectance Resolution | 0.01 dB |
| Reflectance Accuracy | ±2 dB |
| Trace File Format | SR-4731 Issue 2 |
| Internal Launch Fiber | ≥50 m internal launch fibers (SMF and MMF) |
| OTDR Modes | Supports Auto, Expert, Real-Time |
| Live Fiber Protection | No OTDR damage when connected to live fiber delivering ≤ +3 dBm at wavelength(s) in range 825 to 1675 nm |
| Live Fiber Detection | Reports live fiber when optical signal detected with wavelength in range 825 to 1675 nm, average power level ≥-35 dBm and either CW or modulation frequency ≥270 Hz |
| OPTICAL POWER METER (OPM) | |
|---|---|
| Calibrated Wavelengths | 850, 1300, 1310, 1490, 1550, 1625, 1650 nm |
| Detector Type | InGaAs PIN, 2 mm diameter |
| Measurement Range | +3 to -70 dBm |
| Wave ID | Automatically synchronizes and measures 1, 2 or 3 Wave ID combinations |
| Range | +3 to -40 dBm @ 850 nm; +3 to -50 dBm @ 1300, 1310, 1550 nm |
| Tone Detect | Auto-detects 270, 330 Hz; 1, 2 kHz tones; |
| Accuracy | ±5% @-10 dBm |
| Linearity | ±0.1 dB (-3 to -40 dBm); ±0.25 dB (-40 to -50 dBm) |
| Measurement Units | Power in dBm, nW, µW, mW; Loss in dB; 0.01 dB resolution |
| OPTICAL LIGHT SOURCE (OLS) | MULTIMODE |
|---|---|
| Emitter Type | LED |
| Safety Class | Class 1 FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03 |
| Center Wavelengths | 850/1300 ± 20 nm |
| Launch Condition | Controlled Launch at 850 nm (comparable to encircled flux into OM4) |
| Spectral Width (FWHM) | N/A |
| Internal Modulation | 270 Hz, 330 Hz, 1 kHz, 2 kHz, CW, Wave ID |
| Wave ID (nm) | 850, 1300, 850/1300 |
| Output Power | -20 dBm ± 1.5 dB (CW, 850 or 1300 nm into 50 µm MMF) |
| Output Power Stability | ≤± 0.2 dB (15 min. after 30 min. warm-up); ≤ ±0.1 dB (8 hours after 2 hours warm-up) |
| OPTICAL LIGHT SOURCE (OLS) | SINGLEMODE |
|---|---|
| Emitter Type | Laser |
| Safety Class | Class 1 FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03 |
| Center Wavelengths | 1310/1550 ±20 nm |
| Launch Condition | N/A |
| Spectral Width (FWHM) | 5 nm max |
| Internal Modulation | 270 Hz, 330 Hz, 1 kHz, 2 kHz, CW, Wave ID |
| Wave ID (nm) | 1310, 1550, 1310/1550 |
| Output Power | -1 dBm ± 1.5 dB (CW, 1310 or 1550 nm into SMF-28) |
| Output Power Stability | ≤± 0.2 dB (15 min. after 30 min. warm-up); ≤ ±0.1 dB (8 hours after 2 hours warm-up) |
| VISUAL FAULT IDENTIFIER (VFI) | |
|---|---|
| Emitter Type | Visible red laser, 650 ±20 nm |
| Safety Class | Class II FDA 21 CFR 1040.10 and 1040.11, IEC EN60825-1: 2007-03 |
| Output Power (nominal) | 0.8 mW into single-mode fiber |
| Modes | CW and 2 Hz flashing |
| GENERAL | |
|---|---|
| Size | 135 x 122 x 43 mm (5.4 x 4.8 x 1.7 in) |
| Weight | 0.4 kg (0.9 lb) |
| Operating Temperature | -18°C to +50°C, 0 to 95% RH (non-condensing) |
| Storage Temperature | -30°C, to +60°C, 0 to 95% RH (non-condensing) |
| CE Safety & EMI/RFI | EN61010-1; EMI/RFI: EN55011, EN61326-1, GR-196-CORE 4.5.1 |
| RoHS | 2011/65/EU |
| PART NUMBER | DESCRIPTION |
|---|---|
| RG-2100-Q01 | ROGUE® Quad OTDR Module |
| RG-2100-Q02 | ROGUE® Quad OTDR Module with OPM/OLS |
| RG-2100-S01 | ROGUE® Singlemode OTDR Module |
| RG-2100-S02 | ROGUE® Singlemode OTDR Module with OPM/OLS |
| RGK-OTDR-BQ02 | ROGUE® iB1 Base with Quad OTDR and OPM/OLS |
| RGK-OTDR-CQ02 | ROGUE® cB1 Base with Quad OTDR and OPM/OLS |
| RGK-OTDR-BS02 | ROGUE® iB1 Base with SM OTDR and OPM/OLS |
| RGK-OTDR-CS02 | ROGUE® cB1 Base with SM OTDR and OPM/OLS |
Each ROGUE OTDR Module includes an SC connector adapter for the OTDR/OLS port and universal 2.5mm adapters for the VFI and OPM (if installed) ports. Specify UPC (U) or APC (A) connector option for single-mode OTDR/OLS port.
ROGUE OTDR Kits bundle together a ROGUE cB1 or iB1 Base unit, dual or quad OTDR module, carry strap, power supply, One-Click® cleaner, fiber ring launch cable(s), aeRos OTDR Basic license and soft carry case.
