ROGUE® OLTS-CERT Module tests up to 2 fibers bi-directionally to industry standards measuring insertion loss, return loss, and length on multimode & singlemode networks. Each test port is equipped with an optical light source and power meter to enable bi-directional testing on a single fiber. Users can select from a library of ISO/IEC/TIA/IEEE test limits to provide tier 1 fiber certification to the latest cable and network standards.
Available in dual multimode 850/1300nm, dual singlemode 1310/1550nm, or quad 850/1300/1310/1550nm each model comes equipped with an additional power meter, and visual fault identifier for fault detection and troubleshooting. ROGUE modules are hot-swappable by design and insert into either cB1, or iB1 base options to be paired with downloadable test apps for seamless connectivity to aeRos® Cloud-based Test Management for remote configuration, project progress tracking, and instant real-time access to test results.
ROGUE OLTS-CERT can be paired with Multi-Fiber Switch (MFS) for 12 fiber bi-directional certification to IEEE 40 and 100G test limits. MFS comes packaged in MPO add-on kits available in both multimode and singlemode. Each kit contains two switches which connect to the ROGUE cB1 and iB1 base units via USB. A 0.3m SC – SC patch cable connects the optical test port from ROGUE OLTS-Cert to the input on MFS with MPO output ready for testing.
| OLTS | MULTIMODE |
|---|---|
| Emitter Type | LED |
| Wavelengths | 850 ±30 nm; 1300 ±20 nm |
| Safety Class | Class I FDA 21 CFR 1040.10 and 1040.11, IEC EN60825-1: 2007-03 |
| Detector Type | InGaAs |
| Launch Condition | Encircled Flux Compliantb |
| Length Measurement Range | 5 km |
| Power Measurement Range | -3 to +60 dBm |
| Output Power | -24/-23 dBm, 62.5/50 μm |
| Stabilityc | ±0.1 dB over 1 hour ±0.15 dB over 8 hours |
| Wave ID Transmit | Yes |
| Tone Generation | 330 Hz, 1 kHz, 2 kHz |
| Input Connector | Interchangeable connector adapter (LC standard, SC, ST, FC optional) |
| OLTS | SINGLEMODE |
|---|---|
| Emitter Type | Laser |
| Wavelengths | 1310, 1550 ±20 nm |
| Safety Class | Class I FDA 21 CFR 1040.10 and 1040.11, IEC EN60825-1: 2007-03 |
| Detector Type | InGaAs |
| Launch Condition | N/A |
| Length Measurement Range | 200 km (SMF28e) |
| Power Measurement Range | -3 to +60 dBm |
| Output Power | -3 dBm, 9 μm |
| Stabilityc | ±0.1 dB over 1 hour ±0.15 dB over 8 hours |
| Wave ID Transmit | Yes |
| Tone Generation | 330 Hz, 1 kHz, 2 kHz |
| Input Connector | Interchangeable connector adapter (LC standard, SC, ST, FC optional) |
| OPTICAL POWER METER (OPM) | |
|---|---|
| Calibrated Wavelengths | 850, 1300, 1310, 1490, 1550, 1625, 1650 nm |
| Detector Type | InGaAs PIN, 2 mm diameter |
| Measurement Range | +3 to -70 dBm |
| Wave ID | Automatically synchronizes and measures 1, 2 or 3 Wave ID combinations |
| Range | +3 to -40 dBm @ 850 nm; +3 to -50 dBm @ 1300, 1310, 1550 nm |
| Tone Detect | Auto-detects 270, 330 Hz; 1, 2 kHz tones; |
| Accuracy | ±5% @-10 dBm |
| Linearity | ±0.1 dB (-3 to -40 dBm); ±0.25 dB (-40 to -50 dBm) |
| Measurement Units | Power in dBm, nW, µW, mW; Loss in dB; 0.01 dB resolution |
| VISUAL FAULT LOCATOR (VFL) | |
|---|---|
| Emitter Type | Visible red laser, 650 ±20 nm |
| Safety Class | Class II FDA 21 CFR 1040.10 and 1040.11, IEC EN60825-1: 2007-03 |
| Output Power (nominal) | 0.8 mW into single-mode fiber |
| Modes | CW and 2 Hz flashing |
| GENERAL | |
|---|---|
| Size | 135 x 122 x 43 mm (5.4 x 4.8 x 1.7 in) |
| Weight | 0.4 kg (0.9 lb) |
| Operating Temperature | -18°C to +50°C, 0 to 95% RH (non-condensing) |
| Storage Temperature | -30°C, to +60°C, 0 to 95% RH (non-condensing) |
| CE Safety & EMI/RFI | EN61010-1; EMI/RFI: EN55011, EN61326-1, GR-196-CORE 4.5.1 |
| RoHS | 2011/65/EU |
| PART NUMBER | DESCRIPTION |
|---|---|
| RG-1100-Q01 | ROGUE® Quad OLTS-CERT Module |
| RG-1100-M01-D | ROGUE® Dual MM OLTS-CERT Module |
| RG-1100-S01-D | ROGUE® Dual SM OLTS-CERT Module |
| RGK-CERT01 | ROGUE® Quad Certification Kit with cB1 base |
| RGK-CERT02 | ROGUE® Dual MM & SM Certification Kit with cB1 base |
| RGK-CERT03 | ROGUE® Dual SM Certification Kit with cB1 base |
| RGK-CERT04 | ROGUE® Dual MM Certification Kit with cB1 base |
| RGK-CERT01B1 | ROGUE® Quad Certification Kit with iB1 base |
| RGK-CERT02B1 | ROGUE® Dual MM & SM Certification Kit with iB1 base |
| RGK-CERT03B1 | ROGUE® Dual SM Certification Kit with iB1 base |
| RGK-CERT04B1 | ROGUE® Dual MM Certification Kit with iB1 base |
Each certification kit includes (2) ROGUE cB1 or iB1 Base, (2) Test Modules, (2) AC charger, (2) battery, (2) carry strap, (1) carry case, (1) One-Click Cleaner SC/2.5 mm, (1) One-Click Cleaner LC/1.25 mm, switchable test port adapters and test accessories.
