DG360_048

Fiber Raceway Trapeze Hanger kit

Supports fiber raceway from the ceiling or from the C channel bar.

240zc5

Straight Fiber Raceway

Used to carry the cables horizontally throughout the system. Accepts cover and fittings.

360xw1

45° Down Elbow Fiber Raceway

Attaches to 4"x15", 4"x10", 4"x5", or 2.36"x2.36" channel and/or fitting to create a 45° downward angle from a straight horizontal run.

240qrst

Vertical cutting in Tee Fiber Raceway

Attaches to 4"x10" or 4"x5" channel to create a 90° horizontal elbow from anywhere on a straight horizontal run

3in

Fibre Raceway Coupler

Quickly joins two sections of channel and/or fittings. Tighten and release bolts by fingers, absolutely toolless.

3604t

Cross Fitting Fiber Raceway

Attaches to 4"x15", 4"x10", 4"x5", or 2.36"x2.36" channel and/or fittings to create a horizontal four way cross intersection with two 4"x15", 4"x10", 4"x5", or

360wt

Horizontal Elbow Fiber Raceway

Attaches to 4"x15", 4"x10", 4"x5", or 2.36"x2.36" channel and/or fittings to create a 90° horizontal elbow from a straight horizontal run.

360upw

45° Up Elbow Fiber Raceway

Attaches to 4"x15", 4"x10", 4"x5", or 2.36"x2.36" channel and/or fitting to create a 45° upward angle from a straight horizontal run. Used with 45° Down Elbow

360st

Horizontal Tee Fiber Raceway

Attaches to 4"x15", 4"x10", 4"x5", or 2.36"x2.36" channel and/or fittings to create a 90° horizontal branch from a straight horizontal run.

360-240zj1

Fiber Raceway Adaptor

Attaches any 4"x15", fitting or channel to any 4"x10" fitting or channel, or any 4"x10" to any 4"x5" fitting or channel.

ADK01cq1

Downspout Kit Fiber Raceway

Assembles onto 4"x5", 4"x10", or 4"x15" channel, spilling over the side into a 90mm or 130mm movable exit with or without corrugated pipe.

360ftb

End Cap Fiber Raceway

Used for closing off open ends of the channel or fittings

Adjustable Cabinet Top Support Kit

Fibre Raceway Cabinet Top Support Kit (Fixed & Adjustable)

Used to carry the cables horizontally throughout the system. Accepts cover and fittings.

L Shaped Hanger

Fiber Raceway Ladder Rack Side Support Kit

Used to support the 4"x5" or 4"x10" system by spanning two existing threaded rod drops. Can be installed from above or below.